Auxiliary files

Auxiliary readers allow you to read in timeseries data accompanying a trajectory, that is not stored in the regular trajectory file.

Supported formats

Reader	Format	Extension (if file)	Remarks
XVGReader	XVG	xvg (default)	Produced by Gromacs during simulation or analysis. Reads full file on initialisation.
XVGFileReader	XVG-F	xvg	Alternate xvg file reader, reading each step from the file in turn for a lower memory footprint. XVGReader is the default reader for .xvg files.

Reading data directly

In [1]: import MDAnalysis as mda

In [2]: from MDAnalysis.tests.datafiles import XVG_BZ2  # cobrotoxin protein forces

In [3]: aux = mda.auxiliary.core.auxreader(XVG_BZ2)

In [4]: aux
Out[4]: <MDAnalysis.auxiliary.XVG.XVGReader at 0x7feb5be02eb0>

In stand-alone use, an auxiliary reader allows you to iterate over each step in a set of auxiliary data.

In [5]: for step in aux:
   ...:     print(step.data)
   ...: 
[    0.        200.71288 -1552.2849  ...   128.4072   1386.0378
 -2699.3118 ]
[   50.      -1082.6454   -658.32166 ...  -493.02954   589.8844
  -739.2124 ]
[  100.       -246.27269   146.52911 ...   484.32501  2332.3767
 -1801.6234 ]

Use slicing to skip steps.

In [6]: for step in aux[1:2]:
   ...:     print(step.time)
   ...: 
50.0

The auxreader() function uses the get_auxreader_for() to return an appropriate class. This can guess the format either from a filename, ‘

In [7]: mda.auxiliary.core.get_auxreader_for(XVG_BZ2)
Out[7]: MDAnalysis.auxiliary.XVG.XVGReader

or return the reader for a specified format.

In [8]: mda.auxiliary.core.get_auxreader_for(format='XVG-F')
Out[8]: MDAnalysis.auxiliary.XVG.XVGFileReader

Loading data into a Universe

Auxiliary data may be added to a trajectory Reader through the add_auxiliary() method. Auxiliary data may be passed in as a AuxReader instance, or directly as e.g. a filename, in which case get_auxreader_for() is used to guess an appropriate reader.

In [9]: from MDAnalysis.tests.datafiles import PDB_xvf, TRR_xvf

In [10]: u = mda.Universe(PDB_xvf, TRR_xvf)

In [11]: u.trajectory.add_auxiliary('protein_force', XVG_BZ2)

In [12]: for ts in u.trajectory:
   ....:     print(ts.aux.protein_force)
   ....: 
[    0.        200.71288 -1552.2849  ...   128.4072   1386.0378
 -2699.3118 ]
[   50.      -1082.6454   -658.32166 ...  -493.02954   589.8844
  -739.2124 ]
[  100.       -246.27269   146.52911 ...   484.32501  2332.3767
 -1801.6234 ]

Passing arguments to auxiliary data

For alignment with trajectory data, auxiliary readers provide methods to assign each auxiliary step to the nearest trajectory timestep, read all steps assigned to a trajectory timestep and calculate ‘representative’ value(s) of the auxiliary data for that timestep.

To set a timestep or ??

‘Assignment’ of auxiliary steps to trajectory timesteps is determined from the time of the auxiliary step, dt of the trajectory and time at the first frame of the trajectory. If there are no auxiliary steps assigned to a given timestep (or none within cutoff, if set), the representative value(s) are set to np.nan.

Iterating over auxiliary data

Auxiliary data may not perfectly line up with the trajectory, or have missing data.

In [13]: from MDAnalysis.tests.datafiles import PDB, TRR

In [14]: u_long = mda.Universe(PDB, TRR)

In [15]: u_long.trajectory.add_auxiliary('protein_force', XVG_BZ2, dt=200)

In [16]: for ts in u_long.trajectory:
   ....:     print(ts.time, ts.aux.protein_force[:4])
   ....: 
0.0 [    0.        200.71288 -1552.2849   -967.21124]
100.00000762939453 [  100.       -246.27269   146.52911 -1084.2484 ]
200.00001525878906 [nan nan nan nan]
300.0 [nan nan nan nan]
400.0000305175781 [nan nan nan nan]
500.0000305175781 [nan nan nan nan]
600.0 [nan nan nan nan]
700.0000610351562 [nan nan nan nan]
800.0000610351562 [nan nan nan nan]
900.0000610351562 [nan nan nan nan]

The trajectory ProtoReader methods next_as_aux() and iter_as_aux() allow for movement through only trajectory timesteps for which auxiliary data is available.

In [17]: for ts in u_long.trajectory.iter_as_aux('protein_force'):
   ....:     print(ts.time, ts.aux.protein_force[:4])
   ....: 
0.0 [    0.        200.71288 -1552.2849   -967.21124]
100.00000762939453 [  100.       -246.27269   146.52911 -1084.2484 ]

This may be used to avoid representative values set to np.nan, particularly when auxiliary data is less frequent.

Sometimes the auxiliary data is longer than the trajectory.

In [18]: u_short = mda.Universe(PDB)

In [19]: u_short.trajectory.add_auxiliary('protein_force', XVG_BZ2)

In [20]: for ts in u_short.trajectory:
   ....:     print(ts.time, ts.aux.protein_force)
   ....: 
0.0 [    0.        200.71288 -1552.2849  ...   128.4072   1386.0378
 -2699.3118 ]

In order to acess auxiliary values at every individual step, including those outside the time range of the trajectory, iter_auxiliary() allows iteration over the auxiliary independent of the trajectory.

In [21]: for step in u_short.trajectory.iter_auxiliary('protein_force'):
   ....:     print(step.data)
   ....: 
[    0.        200.71288 -1552.2849  ...   128.4072   1386.0378
 -2699.3118 ]
[   50.      -1082.6454   -658.32166 ...  -493.02954   589.8844
  -739.2124 ]
[  100.       -246.27269   146.52911 ...   484.32501  2332.3767
 -1801.6234 ]

To iterate over only a certain section of the auxiliary:

In [22]: for step in u_short.trajectory.iter_auxiliary('protein_force', start=1, step=2):
   ....:     print(step.time)
   ....: 
50.0

The trajectory remains unchanged, and the auxiliary will be returned to the current timestep after iteration is complete.

Accessing auxiliary attributes

To check the values of attributes of an added auxiliary, use get_aux_attribute().

In [23]: u.trajectory.get_aux_attribute('protein_force', 'dt')
Out[23]: 50.0

If attributes are settable, they can be changed using set_aux_attribute().

In [24]: u.trajectory.set_aux_attribute('protein_force', 'data_selector', [1])

The auxiliary may be renamed using set_aux_attribute with ‘auxname’, or more directly by using rename_aux().

In [25]: u.trajectory.ts.aux.protein_force
Out[25]: 
array([    0.     ,   200.71288, -1552.2849 , ...,   128.4072 ,
        1386.0378 , -2699.3118 ])

In [26]: u.trajectory.rename_aux('protein_force', 'f')

In [27]: u.trajectory.ts.aux.f
Out[27]: 
array([    0.     ,   200.71288, -1552.2849 , ...,   128.4072 ,
        1386.0378 , -2699.3118 ])

Recreating auxiliaries

To recreate an auxiliary, the set of attributes necessary to replicate it can first be obtained with get_description(). The returned dictionary can then be passed to auxreader() to load a new copy of the original auxiliary reader.

In [28]: description = aux.get_description()

In [29]: list(description.keys())
Out[29]: 
['represent_ts_as',
 'cutoff',
 'dt',
 'initial_time',
 'time_selector',
 'data_selector',
 'constant_dt',
 'auxname',
 'format',
 'auxdata']

In [30]: del aux

In [31]: mda.auxiliary.core.auxreader(**description)
Out[31]: <MDAnalysis.auxiliary.XVG.XVGReader at 0x7feb4b570250>

The ‘description’ of any or all the auxiliaries added to a trajectory can be obtained using get_aux_descriptions().

In [32]: descriptions = u.trajectory.get_aux_descriptions(['f'])

To reload, pass the dictionary into add_auxiliary().

In [1]: u2 = mda.Universe(PDB, TRR)

In [2]: for desc in descriptions:
   ...:     u2.trajectory.add_auxiliary(**desc)
   ...: